Molot compressor updated to 0.2.145

New version available in download page. What’s new:

  • New upsampling code: latency now 2 samples
  • Faster limiter release
  • Fixed bug with preset names changing

Новая версия доступна на странице загрузки. Что нового:

Новый алгоритм передискретизации: задержка теперь 2 отсчета
Уменьшено время релиза лимитера
Исправлена ошибка с изменением имен пресетов

I used previous version of Molot in some projects and I think the limiter was too soft and too slow. As the main idea for limiter in Molot is to control peaks in sigma mode I changed limiter settings to more aggressive.

Also I have a lot of fun pictures for new post about some experiments with different upsampling algorithms (step, linear, polynomial, sinc function). It’ll come soon.

Just few examples:

And finally a picture for soul 🙂

Good luck!

6 responses to “Molot compressor updated to 0.2.145

  1. Alex 2011/03/06 at 15:59

    hey the preset thing works now, great. thx for it and for that nice picture.

  2. Steve 2011/03/18 at 15:55


    I Have a quastion… It has higher sampling rate support? 48 / 88.2 / 96 / 176.4 / 192 khz
    I cant find manuals or something like specs.

    PreThank You!

    • vladgsound 2011/03/18 at 18:06

      Hello! It should work OK on any samplerate higher than 44.1.

      I had real experience with mixing 48 kHz projects and it worked fine with 48 kHz.
      It sounds great on 88.2 & 96 kHz for test wave files.
      The waveform looks OK on 176.4 & 192 kHz for test wave files but I can’t hear because by audio interface doesn’t support it.

      On higher sample rates (>= 96 kHz) you can lower upsampling down to 2x or turn it off to save your CPU.

  3. uzi 2011/04/24 at 00:16

    hi i like to know if you can make a vir of the comprssor with a fast releas like 1ms or less for pumping very hard so it bring out the room sound on drums even on 16 db gain reduction the meter will return to zero. please im loking for one and the only one that is capable is the mix bus from ssl.
    this is what its missing with all the compressors thy jast dont pump whan you need tham.
    loking forward for your replay/
    thanks uzi

Leave a Reply to vladgsound Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: